Resolving HP Officejet 7500A printing issues

The HP Officejet 7500A is a multifunctional and one of the most affordable printers. The printer is capable enough to provide prints with good resolution in optimal speed. The printer has a suitable design and can be easily handled by the users. The basic paper-handling efficiency of the printer is optimal. For any assistance in installation or setup procedures users can visit our site 123hp.com/setup. However, at times users can come across certain printing issues like its quality of the print may not be good or more. These issues can be resolved with the few troubleshooting tips and techniques discussed below.

Potential solution for HP Officejet 7500A printing issues

Try the following solutions to resolve the printing issue.

• Always download the full HP software for every HP printers. In case you did not have featured full HP software, install the full software by visiting the HP software and drivers page.
• HP always recommends its users to use genuine HP cartridges.
• HP also allows you to check the authenticity of your cartridges by visiting hp.com/go/anticounterfeit.
• You can visit HP SureSupply to check for the compatible ink or toner cartridge for your printer while purchasing replacement cartridges.
• Check the paper used for printing and make sure it is appropriate for the print Job.
• Wrinkled or curled paper is not be used. You can utilize clean and wrinkle-free paper to print with the printer.
• Choose the right paper type and format.
• HP recommends ColorLok technology papers that can go well with HP ink.
• For dense printing, try HP Advanced Photo Papers.
• The photo paper can be stored in its original packaging and can be loaded only at the time of printing.
• The inappropriate paper type may cause vertical streaks in printouts
• The vertical streaks can also be due to the problem in the copier or dirty scanner glass.
• Check the print settings by opening the HP Toolbox.
• Double-click the HP printer icon and then choose the Printer Actions, and then open the Set Preferences option.
• Once the Printing Preferences dialog box opens, select the Paper/Quality tab.
• Select the right Paper Source and preferred Paper sizes.
• Set the preferred printer quality Settings.
• Try increasing the print quality value for more satisfied printing.
• Rather the quality can be decreased to increase the printing speed.
• Select the Paper/Quality tab to check and ensure the Print in Grayscale option is set to Off.
• Now check if the printing issues are resolved.
• If the issues still persist check for ink levels, and then replace the low or empty ink cartridges.
• Once the cartridges are replaced, Align the printer if the printer alignment does not occur automatically.
• The printer now prints an alignment page, once it aligns the printhead.
• Check if the printing issue of HP Officejet 7500A is resolved. In case the issue persists, try evaluating the print quality report to troubleshoot defects.